For those not following the Forscan thread. I was able to completely enable OCR in Forscan. Use the actual modules and not the as built settings. The modules have the options to change it.
First, bring up the IPC module and change the Auto regen checkbox to show it in the instrument panel. I don't have a screen shot of this but it is near the top. The checkbox will come up but you can't do anything to it.
Next, go to the PCM and there is a option (some say it is new) to turn on OCR in the PCM. Below is the initial screen for the PCM
Once you select DPF Manual Regeneration, this screen comes up
Choose the third option and apply it.
After the PCM reboots, you will be able to control the regen checkbox.
2018 Ford F-150 King Ranch 3.0L Power Stroke 4x4 | Icon 2.5 Front & 2.0 Rear, Toyo AT II 295/60R20, 3" ProComp Rear Block, S&B Dry CAI, LineX & BakFlip MX4, BuiltRight Seat Release | ForScan Mods: Disable Double Honk, 2x Panic, DPF Full %, Digital Temps Above Gauges, A.S.S Disabled | HP Tuners/nGauge, EzLynk, Ford VCM II, OBDLink MX+