Diesel F150 Forum banner

FSA 18E02: EGR By-pass valve replacement

143K views 302 replies 49 participants last post by  beaker  
Dealer fixed the error code, don’t know what the problem was and it was not on the repair receipt so I suspect it was something simple like I expected.

They also installed a new power cord for the block heater.

All up to date now on recalls, wonder what is next.

KR2018
 
Error code after EGR Replacement

Had the EGR replaced with screws still in the old unit. All seemed good, but check engine light came on just before I got home with it.

Checked with Forscan and it is error code P2458C. Which is regen did not complete.

It was not in regen on the drive home, particulate filter was at 20%. When I left the dealer. Still shows 20%.

I think I read that some people had a PCM Flash done after the EGR Replacement.

I reset the error code but it immediately came back. Will take it back to the dealer Monday. Hope it is just a loose connector on the Exhaust Pressure Sensor. That would be the easiest fix!

KR2018